Back to Blog
How-to Guides 2026-11-16 Cool Dragon Hobby Premium Gundam (Rare & Limited Editions) 0 views

1/60 PG Unleashed Nu Gundam EVO Decals: Application Walkthrough

1/60 PG Unleashed Nu Gundam EVO Decals: Application Walkthrough

A practical walkthrough for applying EVO water decals to the 1/60 PG Unleashed Nu Gundam, with placement planning and handling checkpoints for a clean finish.

Start with the sheet that matches your kit

The 1/60 PG Unleashed Nu Gundam is a large, detailed build, and the decal set you choose should be sized for it. The EVO Studio water decal set for this kit is specifically sized for the 1/60 PG Unleashed Nu Gundam, so you are not trimming generic markings to fit. That sizing is the first checkpoint: confirm the sheet is the PG Unleashed Nu Gundam version before you cut anything loose.

Water decals differ from stickers in how they sit on the surface. The supplied product information describes this EVO set as offering a clean, precise way to apply markings for a more finished appearance, with water decal application for smooth, paint-friendly results. Treat that as the goal of the walkthrough: markings that sit flat and read as part of the build, not as an afterthought.

What the EVO set confirms

  • 1/60 PG Unleashed Nu Gundam EVO Water Decal: Specifically sized for the 1/60 PG Unleashed Nu Gundam kit. You can plan placement on the actual kit rather than adapting a generic sheet, which reduces wasted decals and trimming.
    1/60 PG Unleashed Nu Gundam EVO Water Decal
    1/60 PG Unleashed Nu Gundam EVO Water Decal
  • 1/60 PG Unleashed Nu Gundam EVO Water Decal: Produced by EVO Studio, known for quality water slide decals. The brand context tells you this is a water-slide product, so your workflow should be water-based, not sticker-based.
  • 1/60 PG Unleashed Nu Gundam EVO Water Decal: Water decal application for smooth, paint-friendly results. The intended result is a smooth surface appearance, which shapes how carefully you position and settle each marking.

A placement-first workflow for the PG Nu Gundam

The order below keeps you from committing decals before you have decided where they go. It uses only what the supplied product information supports and leaves room for your own judgment on the kit.

  1. Dry-fit the sheet against the kit: Before wetting anything, hold the decal sheet near the corresponding areas of the PG Unleashed Nu Gundam. Because the set is sized for this kit, you can compare marking size to the surface and spot places where a marking would cross a panel line or raised detail.
  2. Choose placement that follows the kit's surfaces: The supplied information does not prescribe a marking map, so placement is your call. Favor flat or gently curved areas where a water decal can settle evenly, and keep markings clear of edges that will be handled during assembly or posing.
  3. Cut only the decal you are about to apply: Separate one marking from the sheet at a time. This keeps the rest of the sheet intact and avoids mixing up small markings that look similar.
  4. Apply with water and position before settling: The product is a water decal, and the supplied description ties it to water decal application. Work one marking at a time so you can adjust position while the decal is still movable, then let it settle flat.
  5. Check the result against the finish you want: The stated goal is a clean, precise application for a more finished appearance. After each marking settles, look at it from an angle to confirm it reads as intended before moving to the next one.

Checkpoints that matter more on a 1/60 kit

A Perfect Grade surface gives decals more room, but it also makes placement mistakes more visible. Use these checkpoints as you go rather than at the end.

  • Marking size versus surface area: The set is sized for the 1/60 PG Unleashed Nu Gundam, so a marking that looks small on the sheet may cover more of the kit than expected. Confirm the fit on the part before wetting the decal.
  • Panel lines and raised detail: A water decal needs a surface it can settle onto. Place markings so they do not have to bridge a sharp step or sit across a deep line unless you have decided that is the look you want.
  • Handling during assembly: Large kits get handled a lot. Keep markings away from joints and grip points where repeated contact could disturb them, especially while the build is still being assembled.
  • One marking at a time: Applying a single decal, checking it, then moving on keeps the process controlled. It also means a placement you dislike affects one marking rather than a whole cluster.

Where the supplied information stops

The product record confirms the kit compatibility, the EVO Studio origin, and the water decal application, but it does not include a marking map, setting times, or a recommended softener routine. That means you should not treat any specific timing or chemical step as a manufacturer instruction from this listing. If you use a marking softer, test it on a spare decal or an inconspicuous area first, and follow the softer's own directions rather than assuming a schedule.

The same applies to topcoat and long-term durability. The listing describes a clean, precise application and a more finished appearance; it does not state a protective topcoat requirement. If you plan to topcoat, confirm compatibility with water decals on a test piece before committing the finished PG Nu Gundam.

Catalog reference for your build

  • 1/60 PG Unleashed Nu Gundam EVO Water Decal: EVO Studio water decal set for the 1/60 PG Unleashed Nu Gundam, catalog price USD 7.70 (comparison price USD 11.00). A single set covers the kit it is sized for, so you can plan one application session rather than sourcing multiple sheets.
  • 1/60 PG Unleashed Nu Gundam EVO Water Decal: Ideal for hobbyists seeking extra detail on their Gundam model. This frames the set as a detailing step for builders who want more than the base kit finish, which matches the placement-first approach above.

Related Articles

Customer Service
Home
Products
Cart
Profile